Solution Description
Solution Description
The marine propeller shaft is an important part of the shafting system. We have the stringent management type the planning substance to packaging to make certain the top quality of the shaft
Content List for the stainless steel stern shaft, propeller shaft:
| Chemical Part (%) | ||||||
| C | Si | Mn | P | S | Cr | Ni |
| ≤0.07 | ≤1.00 | ≤2.00 | ≤0.35 | ≤0.30 | seventeen.00-19.00 | 8.00-11.00 |
| Mechanical Houses | |||||
| Tensile Test | Hardness Test | ||||
| o b (MPa) | o s (MPa) | o 5(%) | HB | HRB | HV |
| ≥520 | ≥205 | ≥40 | ≤187 | ≤90 | ≤200 |
| Yeld Worth Toughness at Large Temperature | ||||||||||
| Nominal Thickness (mm) | In the course of the following temperature (°C), o .2 (MP) should be not significantly less than | |||||||||
| one hundred | a hundred and fifty | 200 | 250 | three hundred | 350 | four hundred | 450 | five hundred | 550 | |
| 2-60 | 171 | a hundred and fifty five | one hundred forty four | a hundred thirty five | 127 | 123 | 119 | 114 | 111 | 106 |
| Allowable Tension of Steel Forgings | |||||||||||
| Nominal Thickness (mm) | For the duration of the subsequent temperture (°C), the allowable anxiety should be (MPa) | ||||||||||
| ≤20 | 100 | a hundred and fifty | two hundred | three hundred | 400 | 500 | 550 | 600 | 650 | seven-hundred | |
| 2-sixty | 137 | 137 | 137 | 130 | 114 | 107 | 100 | ninety one | 64 | forty two | 27 |
| 137 | 114 | 103 | ninety six | eighty five | seventy nine | seventy four | seventy one | 62 | 42 | 27 | |
Item Parameters
Specifications for the stern shaft or propeller shaft:
Material: stainless steel 304/316
Processing methods: solid and lathe machining
Proportions: made in accordance to the vessel
Thorough Images
Business Profile
FAQ
Q1. How do you make sure your good quality?
A: All of our goods move rigid multi inspection approach. Every single assembled drive shaft will go through dynamic balance test to steer clear of vibration. We have one hundred% test prior to shipping and delivery.
Q2. What is actually the precise price tag of your products?
A: Remember to speak to us to get the correct price of our products, and the price tag of the items will be fluctuated due to the various buy amount.
Q3. Can you make according to the samples?
A: Of course, we can create by your samples or specialized drawings. We can develop the molds and fixtures. In addition to, we have comprehensive encounter in establishing and modifying the generate shafts as for each customers’ requirements.
Q4. What are your phrases of packing?
A: Normally, we pack our items in neutral packaging. If you have legally registered patent, we can pack the merchandise in your branded boxes soon after obtaining your authorization letters.
Q5. What is your sample plan?
A: We can offer the sample if we have all set components in stock, the sample cost and the courier expense will be compensated by the consumers. Make sure you speak to us to get the accurate sample cost.
|
US $100-100,000 / Piece | |
1 Piece (Min. Order) |
###
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Journal Diameter Dimensional Accuracy: | Cutomized |
| Axis Shape: | Crankshaft |
| Shaft Shape: | Real Axis |
| Appearance Shape: | Round |
###
| Customization: |
Available
|
|---|
###
| Chemical Component (%) | ||||||
| C | Si | Mn | P | S | Cr | Ni |
| ≤0.07 | ≤1.00 | ≤2.00 | ≤0.35 | ≤0.30 | 17.00-19.00 | 8.00-11.00 |
###
| Mechanical Properties | |||||
| Tensile Test | Hardness Test | ||||
| o b (MPa) | o s (MPa) | o 5(%) | HB | HRB | HV |
| ≥520 | ≥205 | ≥40 | ≤187 | ≤90 | ≤200 |
###
| Yeld Value Strength at High Temperature | ||||||||||
| Nominal Thickness (mm) | During the following temperature (°C), o 0.2 (MP) should be not less than | |||||||||
| 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | |
| 2-60 | 171 | 155 | 144 | 135 | 127 | 123 | 119 | 114 | 111 | 106 |
###
| Allowable Stress of Steel Forgings | |||||||||||
| Nominal Thickness (mm) | During the following temperture (°C), the allowable stress should be (MPa) | ||||||||||
| ≤20 | 100 | 150 | 200 | 300 | 400 | 500 | 550 | 600 | 650 | 700 | |
| 2-60 | 137 | 137 | 137 | 130 | 114 | 107 | 100 | 91 | 64 | 42 | 27 |
| 137 | 114 | 103 | 96 | 85 | 79 | 74 | 71 | 62 | 42 | 27 | |
|
US $100-100,000 / Piece | |
1 Piece (Min. Order) |
###
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Journal Diameter Dimensional Accuracy: | Cutomized |
| Axis Shape: | Crankshaft |
| Shaft Shape: | Real Axis |
| Appearance Shape: | Round |
###
| Customization: |
Available
|
|---|
###
| Chemical Component (%) | ||||||
| C | Si | Mn | P | S | Cr | Ni |
| ≤0.07 | ≤1.00 | ≤2.00 | ≤0.35 | ≤0.30 | 17.00-19.00 | 8.00-11.00 |
###
| Mechanical Properties | |||||
| Tensile Test | Hardness Test | ||||
| o b (MPa) | o s (MPa) | o 5(%) | HB | HRB | HV |
| ≥520 | ≥205 | ≥40 | ≤187 | ≤90 | ≤200 |
###
| Yeld Value Strength at High Temperature | ||||||||||
| Nominal Thickness (mm) | During the following temperature (°C), o 0.2 (MP) should be not less than | |||||||||
| 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | |
| 2-60 | 171 | 155 | 144 | 135 | 127 | 123 | 119 | 114 | 111 | 106 |
###
| Allowable Stress of Steel Forgings | |||||||||||
| Nominal Thickness (mm) | During the following temperture (°C), the allowable stress should be (MPa) | ||||||||||
| ≤20 | 100 | 150 | 200 | 300 | 400 | 500 | 550 | 600 | 650 | 700 | |
| 2-60 | 137 | 137 | 137 | 130 | 114 | 107 | 100 | 91 | 64 | 42 | 27 |
| 137 | 114 | 103 | 96 | 85 | 79 | 74 | 71 | 62 | 42 | 27 | |
Screw Sizes and Their Uses
Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.
The major diameter of a screw shaft
The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
The pitch diameter of a screw shaft
When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.
The thread depth of a screw shaft
Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
The lead of a screw shaft
Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.
The thread angle of a screw shaft
The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
The tapped hole (or nut) into which the screw fits
A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.
editor by czh 2023-01-06